Part 3 – Cyber Recovery in Practice with Cohesity NetBackup 11.X

This post walks through all the storage offerings on Netbackup on my lab media server

Storage server in short on a media server tells NetBackup where to store the data it’s supposed to backup.

On both media servers nbu-media01.nbu.local and nbu-media02.nbu.local I’ve added a new drive and created a new folder called msdp in it

Configure Storage server

Storage → Disk storage → Storage servers tab → Add.

Under Storage type Disk storage servers; Category Media Server Deduplication Pool (MSDP, MSDP Cloud, MVG) → Start.

Choose media server nbu-media01.nbu.local.

Give a username and password

  • Username: msdpadmin
  • Password: letters and numbers, e.g. Msdp2026Lab!1

Choose the path F:\MSDP

Click Next to Continue

Review and Click Save

Disk pool Configuration

Click Create disk pool at the top of the confirmation page, or Storage → Disk storage → Disk pools tab → Add.

Choose the volume PureDiskVolume

Click Save.

Disk pool is ready

I’ll add in the second media server as well

Source: Create a Media Server Deduplication Pool storage server (11.2), Configuring a disk pool for deduplication.

Storage Unit

]

Before can consume our disk pools we need to add a Storage Unit

Storage → Storage units → Add → Media Server Deduplication Pool (MSDP) -Input the following

  1. Name stu-msdp-media01
  2. Maximum concurrent jobs 20

Source: Configuring a Media Server Deduplication Pool storage unit.

Save, then check it appears under Storage → Storage units (disk type PureDisk).

Choose disk pool dp-msdp-media01;

Choose media server nbu-media01.nbu.local.

Click Save

It appears under Storage → Storage units (disk type PureDisk).

Storage Unit Groups

They can be used to add extents to existing storage group

Adding Tape Storage

I’ve used this GitHub – markh794/mhvtl: Linux based Virtual Tape Library · GitHub to create a small VTL to emulate the tape library

Go to Storage → Tape storage → Actions → Configure storage devices

Select nbu-media01.nbu.local and Click Next

1 Autoloader is detected

Our Virtual Tape & Library system is detected

Click Next to Continue to create Storage Units

Select a device you want to configure as a storage unit on the NetBackup primary server nbu-primary and Click Save

Tape storage unit is ready

Adding tape storage unit group

Tape storage unit is ready

Commands to check robot status

Reason: 0x0
PS C:\Program Files\Cohesity NetBackup\Volmgr\bin> .\tpconfig.exe -d
Id  DriveName           Type   Residence
      Status  SCSI coordinates/Path
****************************************************************************
0   IBM.ULT3580-TD8.000  hcart2 Standalone
      DOWN    {3,0,0,1}
1   IBM.ULT3580-TD8.001  hcart2 Standalone
      DOWN    {3,0,0,2}
2   IBM.ULT3580-TD6.000  hcart3 Standalone
      UP      {3,0,0,3}
3   IBM.ULT3580-TD6.001  hcart3 Standalone
      UP      {3,0,0,4}

Currently defined robotics are:

EMM Server = nbu-primary.nbu.local

PS C:\Program Files\Cohesity NetBackup\Volmgr\bin> .\scan.exe
************************************************************
*********************** SDT_TAPE    ************************
*********************** SDT_CHANGER ************************
************************************************************
PS C:\Program Files\Cohesity NetBackup\Volmgr\bin> .\scan.exe
************************************************************
*********************** SDT_TAPE    ************************
*********************** SDT_CHANGER ************************
************************************************************
------------------------------------------------------------
Device Name  : ""
Passthru Name: ""
Volume Header: ""
Port: 3; Bus: 0; Target: 0; LUN: 0
Inquiry    : "STK     L700            0108"
Vendor ID  : "STK     "
Product ID : "L700            "
Product Rev: "0108"
Serial Number: "XYZZY_A"
WWN          : ""
WWN Id Type  : 0
Device Identifier: ""
Device Type    : SDT_CHANGER
NetBackup Robot Type: 8
Removable      : Yes
Device Supports: SCSI-5
Number of Drives : 4
Number of Slots  : 39
Number of Media Access Ports: 4
Drive 1 Serial Number      : "00XYZZY_A1"
Drive 2 Serial Number      : "00XYZZY_A2"
Drive 3 Serial Number      : "00XYZZY_A3"
Drive 4 Serial Number      : "00XYZZY_A4"
Flags : 0x0

In the next one we will crack on with Storage lifecycle policy and test A.I.R

(Visited 36 times, 1 visits today)

By Ash Thomas

Ash Thomas is a seasoned IT professional with extensive experience as a technical expert, complemented by a keen interest in blockchain technology.